Pages

Sunday, May 19, 2013

Quilt as desired part one


This is the last day of the Celebrate Hand Quilting spring blog hop and since I put my hand up to do a post, I've been racking my brain thinking about what I should talk about. Then it came to me, why not chat about how I choose my quilting designs.
I could talk about that subject for a long time so I decided to break it up into separate posts starting with big stitch quilting.
This style of quilting has always been around but I only became aware of it after an article in the Quilters' Newsletter Magazine in the nineties. Then a member of a local guild started doing it on her quilts and raved about how extraordinarily fast it was to quilt a whole quilt in a short amount of time.

I like to think about how I'm going to quilt a top during the making of it so I almost always have a plan by the time it's basted. This one was easy enough when it came to the blocks but the space between each block was a head scratcher.  I used Perle # 8 in white and yellow with a # 5 embroidery needle.
The blocks are quilted in the ditch to hold the coloured patches down and the centers are just radiating lines. I finally hit on the idea to fill the negative space between the blocks with a motif I drew up.

Motifs can be found in all sorts of places, look at your quilting stencils and just use parts of them or take photos of quilts at shows or off the Internet for studying later and getting some ideas. I have a few quilting books that provide some inspiration.
The next quilt is scrappy trip around the world and I again used Perle # 8 cotton.
Even though this one is queen sized, it took very little time to quilt. The quilting is a simple cross hatch across each square. I tackled it by zig zagging vertically across the rows of squares, first one way then the other which is what made it go so fast.
The borders are often the part that I plan the quilting for last, especially if the fabric is busy like this spot. It doesn't much matter what one does, the quilting isn't going to be a feature. In the end I chose a simple baptist fan which was a good contrast with all the geometric shapes in the quilt.
You may remember this pickle dish quilt which I made for a granddaughter. It was also done with Perle #8 cotton thread but I went for a pile of variegated colours to make it more fun for me.
It didn't need anything fancy but it is important to distribute the quilting evenly throughout the quilt. Too often I see quilts that have very little stitching on the borders which says to me that the quilter ran out of steam. Those quilts are often the friendly ones that wave a fair bit on the outside and look unfinished.
I had another busy fabric on this border and opted for interlocking circles that mirrored the circular patchwork. Another good option would have been to do piano lines which would have been a good contrast to the round shapes.
I got the quilting ideas for the Mariners Compass quilt from looking at some books containing those types of quilts. I liked the effect of the offset compass lines in the spires. The only consideration is that the seams have to be quilted through. In this case, it wasn't too difficult as I had used a soft wool batting.
In the quilt below, I did another very fast but fun design of all circles. I used plates, cups and egg cups to draw the circles. They were all placed randomly, some interlocking and some smaller shapes inside larger ones. This is what I'd call an all over pattern and is a good standby for scrappy quilts. The threads I used are different colours of sashiko thread and even managed a  larger stitch than what I'd used previously.
It's normal for the stitches on the back to be smaller than the front, this isn't fine hand quilting after all.
Here's the only unfinished quilt that has Perle cotton quilting. I used 1/2" masking tape to guide my stitches. I place the tape and draw around it, I can't seem to cope with tape on the quilt while I'm trying to stitch.
If I were doing this quilt again, I'd up the size of the stitches but back in the day it was hard to go big for me, I think I've gotten over that now though.
There are no size guidelines for using big stitches with a thicker thread. It's what you feel comfortable with and whether or not they'd be toe catchers. I think I do smaller than a lot of people but then again, I've seen this size of stitch done with a Perle cotton # 12 for a more elegant look.
 
This is a great technique for beginning hand quilters, it's easy to master and the bonus is that a quilt can be finished sooner. I love the relaxed look and it's been perfect for utility quilts, scrap quilts  and quilts for the kids because they turn out soft and cuddly.
 
If you'd like to see Perle quilting in action, click on this YouTube link to see Sarah Fielke demonstrating how to do it.
 
The Japanese quilt and the scrappy trip around the world can be see back in this post.

Friday, May 3, 2013

Washing and blocking a quilt


You probably think I've been hiding under a rock for the past month as I haven't been active in blog land but I'm back now and I have a good excuse for my absence.
Remember this old quilt that's been hanging around unfinished for years?  If only I didn't have so many other quilty distractions, sigh.
I've been focusing on a deadline to get this quilt finished and had just over half the trapunto feathers to stuff. Oh boy, that was a big task  finally the day has come to wash and block the quilt before it gets bound. It's a job I don't enjoy but it was better than cleaning my pantry out.
 
I soaked the quilt in the washing machine first to get out all the marking lines. I spun it dry and then washed again in cool water with a wool wash detergent and an abundance of dye catchers.
I laid a flannelette sheet on the rug in the lounge room with the quilt on top. The flannelette works well to hold the quilt in place with minimal movement.
Next step was to square up the middle section containing the rings.
I made sure the diagonal measurements matched and pinned those points
The next step with help from the man of the house was to measure and pin every ring in the middle section and pin as I went. I matched the measurements horizontally and vertically.
After the center was done, it was time to double check that the rings were lined up correctly.
Out came the trusty laser levels. I really must shout myself a right angle tile level.
You can see that I used a large square ruler to get my 90 degrees sorted and lined the edges of the ruler up with the preblocked rings.
 
The next part was to measure my preferred border width from the edge of the rings.
In this case, it's 7 1/2"
Pin, pin, pin and it can stay there until dry which will probably be a day and a bit. I do have a ceiling fan which speeds things up.
When the pins are removed, I'll be marking my cutting lines for the border. I think it's best to do that on the floor while it's all flat.
The next stage will be to bind, sleeve and label. I've named this one Rings And Roses because I couldn't come up with anything better.
I have a nifty trick for the binding part which will be next. I'll lket you know about it next time.
 
Oh and by the way, if  you're at the Sydney quilt show next month, you'll see it hanging out with other quilts.
 
Here's a link to an excellent tutorial with step by step photos for blocking a quilt with borders that I wanted to share with you. You never know when you'll need it.
Quilt Me Happy (click)
 
Until next time, Janet